? rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 1 of 5 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF1200B-111406 notes: 1. unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demo nstration board with impedance matching to 50 w and measured with 50 w network analyzer. 2. unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. rejection is measured as attenuation below the minimum il point in the passband. rejection in final user application is depende nt on pcb layout and external impedance matching design. see application note no. 42 for details. 4. the design, manufacturing process, and specifications of this filter are subject to change. 5. us and international patents may apply. 6. rfm, stylized rfm logo, and rf monolithics, inc. are registered trademarks of rf monolithics, inc. 7. ?copyright 1999, rf monolithics inc. 8. electrostatic sensitive device. observe precautions for handling. electrical characteristics characteristic sym notes min typ max units nominal center frequency f c 1 96 mhz passband bandwidth 20 mhz insertion loss 86.0-----106.0mhz il 1, 2 8 12 db relative attenuation to i.l @ out of pass band (rejection) 0-----68.4mhz 1, 3 51 57 76.8mhz 40 45 123.6-----162.8mhz 56 65 162.8-----1000mhz 35 40 amplitude ripple (p-p) 86.0-----106.0mhz 1, 4 0.9 1.6 amplitude ripple (p-p) @ 25c 86.0-----106.0mhz 1, 4 1.2 group delay ripple (p-p) 86.0-----106.0mhz 1, 5 120 150 ns 1db commpression point 86.0-----106.0mhz 1 12 15 dbm input ip3 1 35 40 dbm operating temperature 1 -40 +85 c terminating impedance 50 ohm case style smp-03 7 x 5 mm nominal footprint lid symbolization (yy=year, ww=week, s=shift) see note 4 rfm SF1200B yywws smp-03 ? low insertion loss ? 5.0 x 7.0 mm surface-mount case ? complies with directive 2002/95/ec (rohs) absolute maximum ratings rating value units maximum incident power in passband +10 dbm max. dc voltage between any 2 terminals 30 vdc storage temperature range -40 to +85 c max soldering profile 265c for 10 s 96.00 mhz saw filter SF1200B pb
96.00 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 2 of 5 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF1200B-111406 ch1 s21 log 1 db/ ref -5 db ch1 center 96 . 000 000 mhz span 25 . 000 000 mhz * cor prm ch2 s21 log 10 db/ ref -10 db ch2 center 96 . 000 000 mhz span 120 . 000 000 mhz * cor prm 3 sep 2003 16:22:45 1 2 3 4 1 : 0 . 0000 db 0 . 000 000 mhz max ref=1 ch1 markers bw : 23 . 156042 mhz cent : 96 . 217717 mhz q : 4 . 1552 1_ loss : -8 . 1508 db 1 2 3 4 5 1 : 0 . 0000 db 0 . 000 000 mhz ref=1 ch2 markers 2 : -55 . 844 db -34 . 4880 mhz 3 : -44 . 904 db -19 . 2000 mhz 4 : -65 . 755 db 27 . 8760 mhz 5 : -72 . 333 db 60 . 0000 mhz 27 . 8760 mhz 5 : -72 ch1 s11 1 u fs * cor prm ch2 s22 1 u fs start 71 . 000 000 mhz stop 121 . 000 000 mhz * cor prm 3 sep 2003 16:36:08 1 1 : 43 . 707 9 . 1582 15 . 183 nh 96 . 000 000 mhz 1 1 : 46 . 582 8 . 9609 14 . 856 nh 96 . 000 000 mhz
96.00 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 3 of 5 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF1200B-111406
96.00 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 4 of 5 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF1200B-111406 tape and reel specifications ?b ? nominal size quantity per reel inches millimeters 7 178 500 13 330 2000 user direction of feed component orientation and dimensions carrier tape dimensions ao 9.4 mm bo 7.4 mm ko 2.0 mm pitch 8.0 mm w 16.0 mm pin #1 see detail "a" 13.0 20.2 2.0 12.0 100 ref. "b" ref.
96.00 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 5 of 5 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF1200B-111406 10-terminal ceramic surface-mount case 7 x 5 mm nominal footprint smp-03 case recommended pcb footprint a b c h e p d h j k case dimensions dimension mm inches min nom max min nom max a 6.80 7.00 7.20 0.268 0.276 0.283 b 4.80 5.00 5.20 0.189 0.197 0.205 c 1.65 2.00 0.065 0.079 d .47 0.60 .73 0.019 0.024 0.029 e 2.41 2.54 2.67 0.095 0.100 0.105 h 0.87 1.0 1.13 0.034 0.039 0.044 j 4.87 5.00 5.13 0.192 0.197 0.202 k 2.87 3.00 3.13 0.113 0.118 0.123 p 1.14 1.27 1.40 0.045 0.050 0.055 electricalconnections connection terminals port 1 input or return 10 return or input 1 port 2 output or return 5 return or output 6 ground all others single ended operation return is ground differential operation return is hot materials solder pad termination au plating 30 - 60 uinches (76.2-152 um) over 80- 200 uinches (203-508 um) ni. lid fe-ni-co alloy electroless nickel plate (8-11% phosphorus) 100-200 uinches thick body al 2 o 3 ceramic pb free
|
